QAQC in Construction

Once you obtained the Approval of Material (SAM) for the certain material. You are now ready to check the material arrived on site. Now! This might be your question “What if the material arrived is not yet approved, what will I do?” Here is what you will do and in case that the material is being reviewed by consultant and it’s eventually be approved later then you may still submit the material inspection with comment as “Awaiting approval.” Here are the steps to follow to checking the materials on your site at the first time. 1. Obtain Delivery Note: Always ask your storekeeper for the arrived material on site and collect the delivery note of that. Just make a routine every morning or every other day on this task, especially if the project has just started. It is expected that there will be volumes of materials that will be arriving. This should be your initiative as a quality assurance and quality control engineer, be proactive on this task. In case you are handling subcontractor, th...

DEFINITION OF ITP? An Inspection and Test Plan (ITP) lays out a schedule of inspections at critical control points or 'hold points' within a process, in order to verify that things are progressing as they should be. It can be defined as the program of inspection, testing of materials, and survey to be prepared and submitted by the contractor to the Consultant for approval before usage and application to the site. An "Inspection and Test Plan" (ITP) might also be called a "Quality Inspection Plan (QTP)". Inspection and Test Plans set out critical control points or ' hold points ' at various stages within a process. Each control point is a scheduled inspection or verification activity, where you will make sure that things are progressing as they should be. Inspection and Test Plans (ITP) are often used as a way to satisfy the requirements of the ISO 9001:2015 standard related to control of production and service provision. Did yo...